Validation QA and QC Examples
Validation QA and QC Examples
Validation QA and QC Examples:BH-02 GEO-QAQC
0
0
1000000
10000000
0
0
1000000
10000000
1
1
Validation QA and QC Examples:BH-02 GEO-QAQC
BH-02 GEO-QAQC
56
548320.25
4809125.6
-80.4921
43.4516
326.4
18
0
10
0
292154694546
1
1
0
0
0
1
1
43584.5518654745
46241.5
Borehole
46239
GAEA Demonstration Drilling
0
46241
-1
0
0
Hollow Stem Auger
0.75
SS / Shelby Tube
0.6
1.5
Validation QA and QC Examples:BH-02 GEO-QAQC
1
3
2
83
0
2
83.3333333333333
2
2
63
Jordan Lee
101
3.74839522095964E-308
Project Manager
10
Admin
Admin
46246.5986848264
461124428
0
0
99450256
46246.5986897454
0
1
1
Validation QA and QC Examples:BH-02 GEO-QAQC
R-305
3
LAB_QC
Water content exceeds liquid limit
LOG_WaterContent
1
WaterContent
WaterContent
Water content exceeds liquid limit
5.25
5.25
0
Watercontentexceedsliquidlimit
1.0
100
The rule identifies a geotechnical data condition that should be verified as part of QA/QC review.
A field observation, laboratory value, classification, interval boundary, or transcription may be inconsistent.
Review the source data and related records; correct verified errors or document a valid engineering exception.
4
44; LL=42
Water content lt= liquid limit
0.97
1
1
0
1
1
2
0
0
ValidationRules/R-305
46246.45
1
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-323
0
CROSS_DATASET
Sand highly saturated
WaterContent
-1
WaterContent
Value
Sand highly saturated
3.75
-999
0
Sand highly saturated.
SandHighlySaturated
1.0
30
The rule identifies a condition that should be verified as part of QA/QC review.
The source value or related record may contain an entry, calculation, classification, or mapping error.
Review the source data and related records, correct verified errors, and document any valid exception before approval.
6
41
< 40
0.6
0
0
1
1
0
0
0
0
ValidationRules/R-323
46246.5764687269
1
3
Validation QA and QC Examples:BH-02 GEO-QAQC
R-021
2
INTERVAL
Intervals must not have gaps
Lithology
3
Lithology Layers
Depth
No gaps in layers
14.5
15
0
Lithology layers should not have gaps.
IntervalsMustNotHaveGaps
1.0
100
Consistent interval geometry is required for reliable logs, calculations, and reports.
Interval boundaries may have been entered incorrectly, duplicated, omitted, or imported out of sequence.
Review the affected and adjacent intervals, correct their boundaries or ordering, and confirm continuous coverage to the intended borehole depth.
0
15
14.5
0.9
1
1
0
1
1
2
0
0
ValidationRules/R-021
46246.5986844676
2
1
Validation QA and QC Examples:BH-02 GEO-QAQC
R-305
3
LAB_QC
Water content exceeds liquid limit
LOG_WaterContent
2
WaterContent
WaterContent
Water content exceeds liquid limit
8.25
8.25
0
Watercontentexceedsliquidlimit
1.0
100
The rule identifies a geotechnical data condition that should be verified as part of QA/QC review.
A field observation, laboratory value, classification, interval boundary, or transcription may be inconsistent.
Review the source data and related records; correct verified errors or document a valid engineering exception.
4
58; LL=55
Water content lt= liquid limit
0.97
1
1
0
1
1
2
0
0
ValidationRules/R-305
46246.45
2
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-350
0
GEOTECHNICAL
Water content exceeds liquid limit
AtterbergLimits
-1
AtterbergLimits
Value
8.25
-999
0
Water content exceeds liquid limit
WaterContentExceedsLiquidLimit
1.0
30
The rule identifies a condition that should be verified as part of QA/QC review.
The source value or related record may contain an entry, calculation, classification, or mapping error.
Review the source data and related records, correct verified errors, and document any valid exception before approval.
6
58
<= 55
0.6
0
0
1
1
0
0
0
0
ValidationRules/R-350
46246.5764687269
2
3
Validation QA and QC Examples:BH-02 GEO-QAQC
R-030
2
INTERVAL
No interval exceeds borehole depth
Lithology
4
Lithologic Layers
Depth
Bottom Depth <= Borehole Depth
15
18.5
0
NoIntervalExceedsBoreholeDepth
1.0
100
The rule identifies a condition that should be verified as part of QA/QC review.
The source value or related record may contain an entry, calculation, classification, or mapping error.
Review the source data and related records, correct verified errors, and document any valid exception before approval.
6
18.5
<= 018
0.9
1
1
0
1
1
2
0
0
ValidationRules/R-030
46246.5986844676
3
1
Validation QA and QC Examples:BH-02 GEO-QAQC
R-605
2
CROSS_DATASET
Soft clay inconsistent with high recovery
LOG_Samples
3
Samples
Recovery
Soft clay inconsistent with high recovery
5.25
5.25
0
Softclayinconsistentwithhighrecovery
1.0
60
The rule identifies a geotechnical data condition that should be verified as part of QA/QC review.
A field observation, laboratory value, classification, interval boundary, or transcription may be inconsistent.
Review the source data and related records; correct verified errors or document a valid engineering exception.
4
98
Review soft clay recovery
0.82
1
0
1
1
1
1
0
0
ValidationRules/R-605
46246.45
3
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-506
1
CROSS_DATASET
Refusal recorded in soft soil
Samples
-1
Samples
NValue
9
9.6
0
RefusalRecordedInSoftSoil
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
58
< 50
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-506
46246.5764687269
3
3
Validation QA and QC Examples:BH-02 GEO-QAQC
R-323
0
CROSS_DATASET
Sand highly saturated
WaterContent
-1
WaterContent
Value
Sand highly saturated
3.75
-999
0
Sand highly saturated.
SandHighlySaturated
1.0
30
The rule identifies a condition that should be verified as part of QA/QC review.
The source value or related record may contain an entry, calculation, classification, or mapping error.
Review the source data and related records, correct verified errors, and document any valid exception before approval.
6
41
< 40
0.6
0
0
1
1
0
0
0
0
ValidationRules/R-323
46246.5986848264
4
1
Validation QA and QC Examples:BH-02 GEO-QAQC
R-508
2
CROSS_DATASET
High moisture with unusually high N-value
LOG_Samples
4
Samples
NValue
High moisture with unusually high N-value
11.25
11.25
0
HighmoisturewithunusuallyhighNvalue
1.0
60
The rule identifies a geotechnical data condition that should be verified as part of QA/QC review.
A field observation, laboratory value, classification, interval boundary, or transcription may be inconsistent.
Review the source data and related records; correct verified errors or document a valid engineering exception.
4
N=58; Water Content=36
Review N-value / moisture
0.8
1
0
1
1
1
1
0
0
ValidationRules/R-508
46246.45
4
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-510
1
DOMAIN
Abrupt N-value change
Samples
5
Samples
NValue
Abrupt N-value change
8.55
9.3
0
Abrupt N-value change within same lithology.
AbruptNValueChange
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
58
similar to 15
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-510
46246.5764687269
4
3
Validation QA and QC Examples:BH-02 GEO-QAQC
R-350
0
GEOTECHNICAL
Water content exceeds liquid limit
AtterbergLimits
-1
AtterbergLimits
Value
8.25
-999
0
Water content exceeds liquid limit
WaterContentExceedsLiquidLimit
1.0
30
The rule identifies a condition that should be verified as part of QA/QC review.
The source value or related record may contain an entry, calculation, classification, or mapping error.
Review the source data and related records, correct verified errors, and document any valid exception before approval.
6
58
<= 55
0.6
0
0
1
1
0
0
0
0
ValidationRules/R-350
46246.5986848264
5
1
Validation QA and QC Examples:BH-02 GEO-QAQC
R-325
2
COMPLETENESS
Water content missing at expected test depth
LOG_WaterContent
5
WaterContent
WaterContent
Water content missing at expected test depth
14.25
14.25
0
Watercontentmissingatexpectedtestdepth
1.0
60
The rule identifies a geotechnical data condition that should be verified as part of QA/QC review.
A field observation, laboratory value, classification, interval boundary, or transcription may be inconsistent.
Review the source data and related records; correct verified errors or document a valid engineering exception.
4
Missing
Expected test value or documented exception
0.92
1
0
1
1
1
1
0
0
ValidationRules/R-325
46246.45
5
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-513
1
CROSS_DATASET
N-value inconsistent with USCS
Samples
6
Samples
NValue
N-value inconsistent with USCS
9
9.6
0
Soft cohesive soil with very high NValue
NValueInconsistentWithUSCS
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
58
<= 50
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-513
46246.5764687269
5
3
Validation QA and QC Examples:BH-02 GEO-QAQC
R-506
1
CROSS_DATASET
Refusal recorded in soft soil
Samples
-1
Samples
NValue
9
9.6
0
RefusalRecordedInSoftSoil
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
58
< 50
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-506
46246.5986848264
6
1
Validation QA and QC Examples:BH-02 GEO-QAQC
R-327
2
GROUNDWATER
High moisture above recorded water table
LOG_WaterContent
6
WaterContent
WaterContent
High moisture above recorded water table
4.5
4.5
0
Highmoistureaboverecordedwatertable
1.0
60
The rule identifies a geotechnical data condition that should be verified as part of QA/QC review.
A field observation, laboratory value, classification, interval boundary, or transcription may be inconsistent.
Review the source data and related records; correct verified errors or document a valid engineering exception.
4
High moisture
Review above-water-table moisture
0.78
1
0
1
1
1
1
0
0
ValidationRules/R-327
46246.45
6
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-605
1
CROSS_DATASET
Soft clay inconsistent with high recovery
Samples
-1
Sample
Recovery
Soft clay inconsistent with high recovery
5.25
5.85
0
Soft clay inconsistent with high recovery
SoftClayInconsistentWithHighRecovery
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
98
<= 95
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-605
46246.5764688079
6
3
Validation QA and QC Examples:BH-02 GEO-QAQC
R-605
1
CROSS_DATASET
Soft clay inconsistent with high recovery
Samples
-1
Sample
Recovery
Soft clay inconsistent with high recovery
5.25
5.85
0
Soft clay inconsistent with high recovery
SoftClayInconsistentWithHighRecovery
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
98
<= 95
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-605
46246.5986848264
7
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-612
0
CROSS_DATASET
Sand unexpectedly wet above water table
Lithology
-1
Lithology
Lithology
Sand unexpectedly wet above water table
1.2
5
0
Sand unexpectedly wet above water table
SandUnexpectedlyWetAboveWaterTable
1.0
30
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
41
<= 40
0.6
0
0
1
1
0
0
0
0
ValidationRules/R-612
46246.5764688079
8
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-618
1
CROSS_DATASET
USCS inconsistent with lithology
USCS
-1
USCS
Classification
USCS inconsistent with lithology
1.05
-999
0
USCS inconsistent with lithology
USCSInconsistentWithLithology
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
SM
!= SM
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-618
46246.5764688079
9
2
Validation QA and QC Examples:BH-02 GEO-QAQC
R-618
1
CROSS_DATASET
USCS inconsistent with lithology
USCS
-1
USCS
Classification
USCS inconsistent with lithology
4.05
-999
0
USCS inconsistent with lithology
USCSInconsistentWithLithology
1.0
60
The rule detects an uncommon or internally inconsistent combination that requires review rather than automatic correction.
One or more related values, classifications, interval boundaries, or observations may be incorrect, or the condition may be unusual but valid.
Compare the flagged values with the original logs and adjacent intervals. Correct confirmed errors; otherwise document the field or engineering basis for accepting the condition.
6
CL
!= CL
0.75
1
0
1
1
1
1
0
0
ValidationRules/R-618
46246.5764688079
1
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
3
2.0.0
46241.6484
46241.6485
148
2
4
0
GAEA QA/QC Demonstration
2
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
1
2.0.0
46246.5764687269
46246.5764688079
6
0
6
1
Admin
3
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
1
2.0.0
46246.5986844676
46246.5986848264
30
2
2
0
Admin
Validation QA and QC Examples:BH-02 GEO-QAQC
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
1
1.5
0
14
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
2
3.75
0
41
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
3
5.25
0
32
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
4
6.75
0
31
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
5
8.25
0
58
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
6
9.75
0
46
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
7
11.25
0
36
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
8
12.75
0
32
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
9
15.75
0
16
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
10
17.25
0
33
Validation QA and QC Examples:BH-02 GEO-QAQC
Dry Density
4
143
Dry Density
kg/m3
Validation QA and QC Examples:BH-02 GEO-QAQC
SCR
22
153
SCR
%
Validation QA and QC Examples:BH-02 GEO-QAQC
Shear Strength
4
145
Shear Strength
kPa
Validation QA and QC Examples:BH-02 GEO-QAQC
TCR
22
154
TCR
%
Validation QA and QC Examples:BH-02 GEO-QAQC
Water Content
12
12
Natural Moisture Content and Atterberg Limits
%
Validation QA and QC Examples:BH-02 GEO-QAQC
1
0
1.2
FILL
FILL
Sand and gravel FILL with trace brick fragments; moist.
Sand and gravel FILL with trace
brick fragments; moist.
Fill
Dark Brown
Not Perceptible
Fine pores
Loose
3
6
6
0
1
0
1
USCS
0
0
1
1
0
16777215
0
16777215
6
1
0
90
50
0
0
1
Validation QA and QC Examples:BH-02 GEO-QAQC
2
1.2
5
SM
SM
Brown silty SAND, trace gravel; moist to wet.
Brown silty SAND, trace gravel;
moist to wet.
Silty Sand
Brown
Not Perceptible
Fine pores
Loose to Compact
3
6
6
0
1
0
1
USCS
0
0
1
1
0
16777215
0
16777215
6
1
0
90
50
0
0
1
Validation QA and QC Examples:BH-02 GEO-QAQC
3
5
10.5
CL
CL
Grey silty CLAY of low plasticity; moist to wet.
Grey silty CLAY of low plasticity;
moist to wet.
Clay
Grey
Not Perceptible
Fine pores
Soft to Firm
3
6
6
0
1
0
10
USCS
0
0
1
1
0
16777215
0
16777215
6
1
0
90
50
0
0
1
Validation QA and QC Examples:BH-02 GEO-QAQC
4
10.5
14.5
SM
SM
Grey-brown silty SAND with gravel; dense.
Grey-brown silty SAND with gravel;
dense.
Silty Sand
Grey Brown
Not Perceptible
Fine pores
Dense
3
6
6
0
1
0
7
USCS
0
0
1
1
0
16777215
0
16777215
6
1
0
90
50
0
0
1
Validation QA and QC Examples:BH-02 GEO-QAQC
5
15
18.5
British-Coarse Sand
British-Coarse Sand
{\rtf1\ansi\deff0\uc1\ansicpg1252\deftab720{\fonttbl{\f0\fnil\fcharset1 Arial;}{\f1\fnil\fcharset2 Wingdings;}{\f2\fnil\fcharset2 Symbol;}}{\colortbl\red0\green0\blue0;\red255\green0\blue0;\red0\green128\blue0;\red0\green0\blue255;\red255\green255\blue0;\red255\green0\blue255;\red128\green0\blue128;\red128\green0\blue0;\red0\green255\blue0;\red0\green255\blue255;\red0\green128\blue128;\red0\green0\blue128;\red255\green255\blue255;\red192\green192\blue192;\red128\green128\blue128;\red0\green0\blue0;}\wpprheadfoot1\paperw12240\paperh15840\margl1880\margr1880\margt1440\margb1440\headery720\footery720\endnhere\sectdefaultcl{\*\generator WPTools_6.060;}{\plain\f0\fs12\cf0 Coarse Sand\par
}}
Coarse Sand
Glacial Till
Brown Grey
Not Perceptible
Fine pores
Very Dense
3
6
6
0
1
0
4
BritishColor
0
0
1
1
0
14286847
0
16777215
6
1
0
90
50
0
0
1
Validation QA and QC Examples:BH-02 GEO-QAQC
0
0
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Description
0
Validation QA and QC Examples:BH-02 GEO-QAQC
QA/QC Findings
0
Validation QA and QC Examples:BH-02 GEO-QAQC
QA/QC Findings
1
3.75
INFO: Sand highly saturated
Validation QA and QC Examples:BH-02 GEO-QAQC
QA/QC Findings
2
5.25
WARNING: Soft clay with unusually high sample recovery.
Validation QA and QC Examples:BH-02 GEO-QAQC
QA/QC Findings
3
8.25
INFO: Water content exceeds liquid limit
Validation QA and QC Examples:BH-02 GEO-QAQC
QA/QC Findings
4
9
WARNING: Refusal recorded in soft soil
Validation QA and QC Examples:BH-02 GEO-QAQC
QA/QC Findings
5
14.5
ERROR: Intervals must not have gaps
Validation QA and QC Examples:BH-02 GEO-QAQC
QA/QC Findings
6
18
ERROR: No interval exceeds borehole depth
Validation QA and QC Examples:BH-02 GEO-QAQC
1
0.75
SS-1
SS
4,6,8
65
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Loose
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
2
2.25
SS-2
SS
6,8,10
72
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Loose to Compact
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
3
3.75
SS-3
SS
8,10,12
76
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Compact
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
4
5.25
ST-1
ST
98
0
0
0.6
1
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Soft
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
5
6.75
SS-4
SS
2,3,4
70
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Soft
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
6
8.25
SS-5
SS
15,27,18
74
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Firm
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
7
9
SS-6
SS
20,28,30
82
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Firm
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
8
10.75
SS-7
SS
12,18,22
48
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Dense
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
9
12.25
SS-8
SS
18,24,32
80
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Dense
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
10
13.75
SS-9
SS
24,30,34
85
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Very Dense
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
11
15.25
SS-10
SS
30,40,50
88
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Very Dense
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
12
16.75
SS-11
SS
50,50,50
90
0
0
0.6
23
0
1
0
0
16777215
0
-1
-1
kg
Not Perceptible
Very Dense
-1
Validation QA and QC Examples:BH-02 GEO-QAQC
1
LOG OF BORING / QA-QC SHOWCASE
BH-02 GEO-QAQC
3
0
Validation QA and QC Examples:BH-02 GEO-QAQC
2
PROJECT:
Validation QA and QC Examples
5
0
Validation QA and QC Examples:BH-02 GEO-QAQC
3
PROJECT NO.:
Validation QA and QC Examples
6
0
Validation QA and QC Examples:BH-02 GEO-QAQC
4
DATE:
8/7/2026
14
0
Validation QA and QC Examples:BH-02 GEO-QAQC
5
SURFACE ELEVATION:
326.4
11
0
Validation QA and QC Examples:BH-02 GEO-QAQC
6
Easting:
548320.25
7
0
Validation QA and QC Examples:BH-02 GEO-QAQC
7
Northing:
4809125.60
8
0
Validation QA and QC Examples:BH-02 GEO-QAQC
8
VALIDATION STATUS:
FAILED - 2 Errors / 2 Warnings
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
9
COMPLETENESS:
83%
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
10
CONFIDENCE:
63%
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
11
QA/QC STATE:
In Progress - Review Required
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
12
Water Observations:
Water strike 6.2 m; stabilized water level 6.8 m.
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
13
Validation Summary:
2 errors, 2 warnings - deliberate geotechnical QA/QC exceptions.
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
14
Reviewed By:
Pending
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
15
Approved By:
Pending
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
16
Notes:
Focused geotechnical QA/QC example for validation demonstration and training.
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Constituents
1
0
1.2
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Constituents
2
1.2
5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Constituents
3
5
10.5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Constituents
4
10.5
14.5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Constituents
5
15
18.5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Structures
1
0
1.2
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Structures
2
1.2
5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Structures
3
5
10.5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Structures
4
10.5
14.5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Structures
5
15
18.5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
USCS Classification
1
SM
1.2
5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
USCS Classification
2
CL
5
10.5
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
USCS Classification
3
SM
10.5
15
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
USCS Classification
4
ML
15
18
0
1
0
Validation QA and QC Examples:BH-02 GEO-QAQC
USCS Classification
USCS Classification
155
Validation QA and QC Examples:BH-02 GEO-QAQC
1
1.5
14
12
22
Validation QA and QC Examples:BH-02 GEO-QAQC
2
3.75
41
18
44
Validation QA and QC Examples:BH-02 GEO-QAQC
3
5.25
32
20
42
Validation QA and QC Examples:BH-02 GEO-QAQC
4
6.75
31
19
40
Validation QA and QC Examples:BH-02 GEO-QAQC
5
8.25
58
24
55
Validation QA and QC Examples:BH-02 GEO-QAQC
6
9.75
46
23
54
Validation QA and QC Examples:BH-02 GEO-QAQC
7
11.25
36
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
8
12.75
32
22
44
Validation QA and QC Examples:BH-02 GEO-QAQC
9
15.75
16
12
18
Validation QA and QC Examples:BH-02 GEO-QAQC
10
17.25
33
22
44
Validation QA and QC Examples:BH-02 GEO-QAQC
WATER LEVEL
6
100
5
0
1
0
0
0
0
1
0
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Well
6
40
30
0
1
0
0
0
0
1
0
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
WATER LEVEL
1
4.8
46240.6
Round 1
m bgs
Electronic water level meter
Water strike during drilling
0
1
16711680
1
3
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
WATER LEVEL
2
5.6
46241.35
Round 2
m bgs
Electronic water level meter
Stabilized water level
0
1
16711680
1
3
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
WATER LEVEL
3
5.4
46241.65
Round 3
m bgs
Electronic water level meter
Post-drilling check
0
1
16711680
1
3
0
0
Validation QA and QC Examples:BH-02 GEO-QAQC
Well
1
2.8
0
0
1
16711680
1
3
0
0